marineinland.com

Trinity Marine Products, Hull 237

“CLYDESDALE” WORK BOAT, 25′-3″x16′x6′, Twin John Deere 6068 Engines @ 300 HP each, 4:1 ZF Gears, 40″ Propellers, 500 Gal Fuel Capacity, Twin 10-Ton manual deck winches, 25′ eye-level view from pilothouse, Electric over Hydraulic controls, RAI’s.

Projected in Recent Projects

Newt Marine Service, Hull 234

“CLYDESDALE” WORK BOAT, 25′-3″x14′x5′, Twin John Deere 6068 Engines @ 300 HP each, 350 Gal Fuel Capacity, Fire Detection/General Alarm, Zinc Anodes, 3/8″ Plate Bottom, Sides, Transom and Head Log, Two Watertight Bulkheads.

Projected in Recent Projects

Giorgio Dredging LTD, Hull 232

DREDGE TENDER, 40′x16′x6′, Twin John Deere 6068 Diesel Engines @ 300 HP each or Cummins QSB5.9 @ 305 HP each, Twin Disc MG-5075 Gears, 2,200 Gal. Fuel Capacity, A-Frame with 20,000# Hyd Winch, IMT Deck Crane.

Projected in Recent Projects

MCM Corporation, Hull 229

Delivered June 2013- Boca Raton, FL “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′, Twin John Deere 6068 @ 300 HP each, Twin Disc MG-5075 with 2.88:1, Four-blade 34″ props, 500 Gal. fuel capacity, Flanking Rudders with Position Indicators, BV Fire Extinguisher and Portable Fire Pump.

Projected in Recent Projects

B & R Construction, Hull 230

Delivered May 2013- Port-au-Prince, HAITI “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′, Dredge Tender, Twin John Deere 6068 Engines @ 201 HP each, 1,150 Gal Fuel Capacity, A-Frame with a 10,000 lb Winch.

Projected in Recent Projects

Stock, Hull 231

“CLYDESDALE” Model Push Boat, 25′-3″x14′x5′, Twin engine design, Your choice of engine manufacture, John Deere, Cummins, Caterpiller etc, 308 to 1000 HP, Pilot House eye level from 10′ to 20′ above sea level, 350 to 500+ Gal. fuel capacity, 6′ to 9′ OAL Push Knees, Custom Paint, Zinc Anodes, Upper and Lower Steering Stations, Can add Generator, A/C, Radar etc. Some options may not be added to this particular hull, depending on the stage of construction at the time of your order.  We can design and build to suit your needs. Please call today for a quote!

Projected in Recent Projects

Shugart Manufacturing, Hull 228

Delivered January 2013- Southport, NC “STALLION” Model, 35′x12′x4′, Powered by One Cummins 5.9L @ 210HP, ZF Gear, Keel Cooled Engine, 24″x18″ 4 Blade Propeller, Approx. 100 Gal Fuel Capacity, Two-2 Ton Nabrico Manual Deck Winches.


Projected in Recent Projects

Inter Coastal Marine LTD., Hull 225

Delivered January 2013-Nassau, Bahamas ”CLYDESDALE”, 25′-3″x14′x6′, Twin John Deere 6068 Diesel Engines @ 300 HP each, Additional 3′ added to Standard Tow Knees, Rudder Angle Indicators, 800 Gal Fuel Capacity, Approximately 640 Gal Potable Water, 10 Kw Genset, A/C for Pilot House and Crew Quarters, 8′x7.5′ Deck House, Sink, Double Berth, Head, Twelve Tire Fenders System, 6′ Sea Chest for future Fire Pump Installation, Galvanized Grating over Steering Gear, Three Fire Extinguishers installed.

Projected in Recent Projects