Delivered September 2015- Beaufort, NC “CLYDESDALE” Model Work Boat, 25′-3″x14’x6′, Twin John Deere 6068 Diesel Engines @ 300 HP each, ZF 305-3 Marine Gears, 500 Gallon Fuel Capacity, Two 5 Ton Deck Winches, Extended Push Knees to 9′ Overall, Elevated Pilothouse, Flanking Rudders, Galvanized Grating Over Steering Gear, Complete RAI System, Zinc Anodes.
Delivered September 2015- Orange Beach, AL “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′. Twin John Deere 6068 Diesel Engines @300 HP each, ZF 305 Gears, Four Flanking Rudders and Two Main Rudders, 500 Gallon Fuel Capacity, Racor Fuel Filters, 9′ Push Knees, Twin 5 Ton Nabrico Deck Winches, Perimeter Handrails and Fenders, Zinc Anodes, Anti-Foul Bottom Paint.
Delivered August 2015- Ft. Lauderdale, FL “STALLION” Model Work Boat, 25′-3″x12’x5′, Twin John Deere 4045 Diesel Engines @ 200 HP each, ZF 280 Gears, Stainless Steel Prop Shafts, 250 Gallon Fuel Capacity, 2 Ton Nabrico Winches, Zinc Anodes and Anti-Foul Paint.
Delivered July 2015- Yonges Island, SC “STALLION” Model Dredge Tender, 25′-3″x12′x6′, Single John Deere 6068 Diesel Engine @300 HP, Twin Disc MG-5091 SC Transmission, 500 Gallon Fuel Capacity, Twin 5 Ton Nabrico Deck Winches, Flanking Rudders, Two Watertight Bulkheads, Stainless Steel Prop Shaft and Hydraulic lines.
Delivered July 2015- Tampa, FL “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′, Twin John Deere 4045 Diesel Engines @200 HP each, ZF 280-1 Gears, 350 Gallon Fuel Capacity, Twin 5 Ton Nabrico Deck Winches, Zinc Anodes, Anti-Foul Bottom Paint.
Delivered November 2013- West Palm Beach, FL “MODEL BOW” TUG BOAT, 25′-11″x12′-6″x6′, Twin John Deere 6090 Heat Exchange Cooled Diesel Engines @425 HP each, ZF W325 Gears, Stainless Steel Propeller Shafts turning 40″ Props, Bollard Pull at Approx. 15,000#, Wet Exhausts, 500 Gallon Fuel Capacity, Triple Bilge Pumps, Fire Detection and General Alarm System, Aluminum Center Console, Kobelt Controls, Continuous Rubber Fender All Around Hull, Zinc Anodes and Anti-Foul Paint.
Projected in Recent Projects
Delivered May 2015 – Centerville, LA “CLYDESDALE” Model Push Boat, 25′-3″x14′x5′, Twin John Deere 4045 Diesel Engines @200 HP each, ZF Gears 2.5:1, 750 Gallon Fuel Capacity, Twin 5 Ton Nabrico Deck Winches, Extended Push Knees, B-V 50# Fire Extinguisher, Portable Diesel Driven Fire Pump, RAI’s, Optional Radios Installed, Zinc Anodes, Anti-Foul Bottom Paint.
Projected in Recent Projects
Delivered May 2015 – Newport News, VA “CLYDESDALE SPECIAL” Work Boat, 39’x15′-6″x6′, Powered by Twin John Deere 6135 @ 500 HP each, Twin Disc MG-5114SC Marine Gears, 38″ Propellers, Twin Main and Four Flanking Rudders, 800 Gallon Fuel Capacity, 380 Kw Generator with separate 200 Gallon Fuel Tank, 12.5 Kw Genset, Three Watertight Bulkheads, Twin 20 Ton Deck Winches, Two 9′ Push Knees, Air Conditioned Pilothouse with 20′ eye level.
Delivered April 2016 – Savannah, GA – DREDGE TENDER, 25′-3″x14’x6′, Single John Deere 6068 Diesel Engine @ 300 HP, Twin Disc 5091 SC Marine Gear, 400 Gal Fuel Capacity, Flanking Rudders, Two Watertight Bulkheads, Heavier plate on Stern and Head Log, Stainless Steel Propeller Shaft and Hydraulic Lines, Push Knees 9′ OAH and Zinc Anodes.
Projected in Recent Projects
Delivered April 2015- Rockland County, NY “CLYDESDALE” Work Boat, 25′-3″x14’x5′, Two John Deere 6068 Marine Diesel Engines @ 300 HP each, Twin Disc MG-5075 Gears, 34″ 4-Blade Propellers, 350 Gal Fuel Capacity, 9′ OAH Push Knees, Four Flanking Rudders, 8.5 Kw Generator, Engine Room Blowers, General Alarm and Fire Detection System, Diesel driven Fire Pump, VHF Radio, GPS Chart Plotter, Zinc Anodes, Anti-Foul Bottom Paint.
